Page 21 - TURNING CATALOG p459-634
P. 21
DGAD/HGAD DGAD, HGAD 1.4N/2N/3N CUTDIA OAH CUTDIA DGAD 4N/5N/6N PARTING
Parting and Grooving Adapters for HF OAL HF OAH
DO-GRIP Double-Ended Inserts
CWN-CWX
CWN-CWX OAL WB
WB WB_2
Designation CWN(2) CWX(3) WB WB_2 OAH HF OAL CUTDIA
DGAD 1.4N 1.40 1.40 1.00 3.2 30.0 24.0 41.50 28.0 EDG 23B*
DGAD 2N EDG 33A*
DGAD 3N (1) 1.90 (4) 2.50 1.60 3.2 30.0 24.0 41.50 32.0 EDG 33A*
EDG 23B*
HGAD 3N 3.00 (4) 3.18 2.40 4.0 30.0 24.0 41.50 32.0 EDG 33A*
EDG 33A*
DGAD 4N 3.00 3.00 2.40 4.0 30.0 24.0 50.50 50.0 EDG 33A*
DGAD 5N 4.00 4.00 3.20 - 30.0 24.0 50.50 50.0
DGAD 6N
4.80 5.00 4.00 - 30.0 24.0 50.50 50.0
6.00 6.35 5.20 - 30.0 24.0 50.50 50.0
• DG..1.0 insert can be mounted into pocket sizes 2 and 3 in which case the pocket width has to be modified - see page 479
• For user guide, see pages 538-547
(1) Only the DGN/R/L inserts are suitable for this adapter
(2) Minimum cutting width
(3) Maximum cutting width
(4) For 1 mm inserts, modify adapter
* Optional, should be ordered separately
For inserts, see pages: DGN-P (487) • DGN-UT/UA (487) • DGN-W (482) • DGN-WP (488) • DGN-Z (486) • DGN/DGNC/DGNM-C (481)
• DGN/DGNM-J/JS/JT (483) • DGR-P (488) • DGR-WP (488) • DGR-Z/ZS (486) • DGR/L-C DGRC/LC-C (482) • DGR/L-J/JS (484) • GRIP (269)
• GRIP (full radius) (270) • HGN-C (489) • HGN-J (489) • HGN-UT (490) • HGR/L-C (489) • HGR/L-J/JS (490)
For holders, see pages: MAHPR/L-JHP (281) • MAHR/L-JHP (279) • MAHR/L (279) • MAHPR/L (280) • C#-MAHD (624) • C#-MAHPD (625)
• C#-MAHDR-45 (623) • C#-MAHDOR (624) • HSK A63WH-MAHUR/L (632) • HSK A63WH-MAHDR-45 (631) • HSK A63WH-MAHDOR (631) • IM-MAHD (633)
• IM-MAHPD (633) • C#-MAHD-JHP (624) • C#-MAHPD-JHP (625) • MAHR/L-JHP-MC (280) • HMSN-New Britain (478) • DGHAL-DECO (478)
Depth Capacity for DGN/R-1002J
Insert on Standard Holders T
Depth: T D max Depth: T D max
Up to 32.3
Up to 1.2 No limit 2.2 29.3 Dmax
2.3 26.7
1.3 830 2.4 24.8
2.5 23.2
1.4 218 2.6 21.7 Cutting Edge
2.7 20.5
1.5 126 2.8 19.4 0.6 3.3
2.9 18.4 Standard Holders Modification
1.6 88.4 3.0
To achieve no limitation on the workpiece diameter up to 3 mm depth, the steel
1.7 68.2 support under the insert should be ground, as per the shown sketch.
1.8 55.6
1.9 46.9
2.0 40.7
2.1 36.0
CUTDIA
DGAD-B-D HF OAH
Parting and Grooving Screw-
Clamped Adapters for DO-GRIP OAL
Double-Ended Inserts
CWN-CWX WB WB_2
Designation CWN(2) CWX(3) WB WB_2 OAL CUTDIA HF OAH
30.3
DGAD 1.4B-D16 1.40 1.40 1.00 3.2 36.80 16.0 24.0 30.3
DGAD 1.5B-D20 (1) 30.3
DGAD 2B-D20 1.00 1.50 1.00 3.2 41.00 20.0 24.0
1.90 2.50 1.60 3.2 41.00 20.0 24.0
• Up to 3 mm depth, without any limitation on the diameter • DG..1.0 insert can also be mounted into pocket sizes 2 and 3,
in which case the pocket width has to be modified-see page 479
• For user guide, see pages 538-547
(1) Do not use DG.. 1.4 on this tool!
(2) Minimum cutting width
(3) Maximum cutting width
For inserts, see pages: DGN-LF/LFT (485) • DGN-P (487) • DGN-UT/UA (487) • DGN-WP (488) • DGN-Z (486) • DGN/DGNC/DGNM-C (481)
• DGN/DGNM-J/JS/JT (483) • DGR-P (488) • DGR-WP (488) • DGR-Z/ZS (486) • DGR/L-C DGRC/LC-C (482) • DGR/L-J/JS (484)
For holders, see pages: C#-MAHD-JHP (624) • C#-MAHPD-JHP (625) • MAHR/L-JHP-MC (280) • MAHPR/L-JHP (281) • MAHR/L-JHP (279)
• MAHR/L (279) • MAHPR/L (280) • C#-MAHD (624) • C#-MAHPD (625) • C#-MAHDR-45 (623) • C#-MAHDOR (624) • HSK A63WH-MAHUR/L (632)
• HSK A63WH-MAHDR-45 (631) • HSK A63WH-MAHDOR (631) • IM-MAHD (633) • IM-MAHPD (633) • HMSN-New Britain (478) • DGHAL-DECO (478)
479
