Page 23 - TURNING CATALOG p459-634

DGN/DGNC/DGNM-C IC328±0.1
Double-Sided Parting Inserts for IC830
Parting and Grooving Bars, Hard IC928RE INSL DGNM
Materials and Tough Applications IC1030CW
IC1028
Dimensions IC354DGN
IC5400
IC1010Tough 1 HardRecommended
IC308Machining Data
IC808
IC908
IC30N
IC20
IC807
IC907

PARTING
f groove

Designation CW CWTOL(3) RE RETOL(4) CDX(5) INSL ••••• (mm/rev)
2.00 0.03 0.20 0.020 18.00 19.90 • • •• • 0.05-0.16
DGN 2002C 2.20 0.03 0.20 0.020 18.00 19.80 • • •••••••••• • 0.05-0.16
DGN 2202C 2.50 0.03 0.20 0.020 18.00 20.70 •• •• 0.08-0.20
DGN 2502C 3.10 0.04 0.20 0.020 18.00 20.10 • • •••••••••••• 0.10-0.25
DGN 3102C 3.10 0.04 0.20 0.020 18.00 21.00 •• 0.10-0.25
DGNC 3102C (1) 3.18 0.04 0.20 0.020 - (6) 20.40 • • • 0.10-0.25
DGNM 3202C (2) 4.00 0.04 0.30 0.030 - (6) 18.80 • • ••• ••••••• 0.10-0.30
DGN 4003C 4.00 0.04 0.30 0.030 - (6) 19.00 •• 0.10-0.30
DGNC 4003C (1) 4.80 0.04 0.30 0.030 - (6) 19.90 • 0.12-0.35
DGN 4803C 5.00 0.04 0.30 0.030 - (6) 19.10 • • • • • • • • • • 0.12-0.35
DGN 5003C 6.35 0.04 0.35 0.030 - (6) 19.10 • • •• • •• • 0.15-0.40
DGN 6303C

• Feed values for grade IC20 should be decreased by 50% • For cutting speed recommendations and user guide, see pages 538-547
(1) Inserts with coolant holes, recommended coolant pressure 10 bar minimum
(2) Single-ended insert
(3) Cutting width tolerance (+/-)
(4) Corner radius tolerance (+/-)
(5) Cutting depth maximum
(6) No depth limit
For tools, see pages: C#-HELIR/L (265) • C#-HFIR/L-MC (573) • CR HFIR-M (575) • D/HGAD RE/LE-JHP (499) • DGAD-B-D (479) • DGAD/HGAD (479)
• DGAQ (515) • DGAQ-JHP (515) • DGFH (268) • DGFH-JHP (269) • DGFHL-26B-TR-D (470) • DGFHR/L (468) • DGFHR/L-B-D..(R/L) (470)
• DGFHR/L-BC-JHP (469) • DGFS (469) • DGPAD-JHP (480) • DGPAD-XL-JHP (480) • DGTR/L (476) • DGTR/L-B-D-JHP-SL (473) • DGTR/L-B-D-JHP-SL-MC (474)
• DGTR/L-B-D-SH (471) • DGTR/L-B/BC-D (475) • DGTR/L-BC-T (476) • HELIR/L (266) • HFAER/L-4 (565) • HFAER/L-5T, 6T (566)
• HFAIR/L-4 (572) • HFAIR/L-DG (573) • HFFR/L-T (564) • HFHR/L-4T (559) • HFHR/L-5T (560) • HFHR/L-6T (561) • HFIR/L-MC (574)
• HFPAD-4 (563) • HFPAD-5 (563) • HFPAD-6 (564) • HFPAD-JHP (562) • HGPAD (267) • HGPAD-JHP (267) • IM-HFIR-MC (574) • NQCH-DGTR/L-D-SH-JHP (472)

481