Page 17 - TURNING CATALOG p459-634

DGTL-BC-D LH DGTL-B-D PARTING
HBH
DGTR/L-B/BC-D H OAL H WB
Integral Shank Reinforced Parting CWN-CWX B
and Grooving Tools Especially
for DGNC Type of Inserts WF
CDX
Left-hand shown

Designation CWN(3) CWX(4) H B WB OAL LH CDX(5) WF HBH CSP(6) Insert

DGTR/L 10B-1.4D20 1.40 1.40 10.0 10.0 1.00 140.00 23.6 10.00 9.50 2.0 0 DG. 14..
DGTR/L 12B-1.4D30 0 DG. 14..
1.40 1.40 12.0 12.0 1.00 140.00 29.6 15.00 11.50 3.5 0 DG. 14..
DGTR/L 16B-1.4D30
1.40 1.40 16.0 16.0 1.00 140.00 29.6 15.00 15.50 -

DGTR/L 20B-1.4D30 1.40 1.40 20.0 20.0 1.00 140.00 29.6 15.00 19.50 - 0 DG. 14..
DGTR/L 10B-2D30 0 DG. 1.../DG. 2..
DGTR/L 12B-2D30 1.90 2.50 10.0 10.0 1.60 140.00 29.6 15.00 9.20 6.6 0 DG. 1.../DG. 2..
DGTR/L 16B-2D32 0 DG. 1.../DG. 2..
DGTR/L 20B-2D35 1.90 2.50 12.0 12.0 1.60 140.00 29.6 15.00 11.20 3.5 0 DG. 1.../DG. 2..

1.90 2.50 16.0 16.0 1.60 140.00 30.6 16.00 15.20 -

1.90 2.50 20.0 20.0 1.60 140.00 32.1 17.50 19.20 -

DGTR/L 25B-2D35 1.90 2.50 25.0 25.0 1.60 140.00 32.1 17.50 24.20 - 0 DG. 1.../DG. 2..
0 DG. 1.../DG. 3..
DGTR/L 12B-3D30 3.00 3.18 12.0 12.0 2.40 140.00 29.6 15.00 10.80 3.5 0 DG. 1.../DG. 3..
1 DGNC/DGRC/DGLC 3...
DGTR/L 16B-3D35 3.00 3.18 16.0 16.0 2.40 140.00 32.1 16.00 14.80 2.6 0 DG. 1.../DG. 3..
1 DGNC/DGRC/DGLC 3...
DGTR/L 16BC-3D35 (1) 3.00 3.18 16.0 16.0 2.40 140.00 31.1 16.00 14.80 2.6 0 DG. 1.../DG. 3..

DGTR/L 20B-3D40 (2) 3.00 3.18 20.0 20.0 2.40 140.00 35.6 20.00 18.80 -

DGTR/L 20BC-3D40 (1) 3.00 3.18 20.0 20.0 2.40 140.00 34.6 20.00 18.80 -

DGTR/L 25B-3D40 (2) 3.00 3.18 25.0 25.0 2.40 140.00 35.6 20.00 23.80 -

• Important: 1.4 mm width inserts should be used only on tools for 1.4 mm specific width tools • DGN/R/L 1 mm inserts can also be mounted into pocket sizes 2 and 3.

• For insert depth capacity table and modification instructions for the 2 and 3 holder pockets, see page 479 • For user guide, see pages 538-547

(1) Tools for inserts with coolant holes for high temperature alloys and stainless steel

(2) Insert's Tmax=18 mm, for deeper penetration modify insert into single-ended

(3) Minimum cutting width

(4) Maximum cutting width

(5) The specified limit refers to the tool

(6) 0 - Without coolant supply, 1 - With coolant supply

For inserts, see pages: DGN-LF/LFT (485) • DGN-P (487) • DGN-UT/UA (487) • DGN-WP (488) • DGN-Z (486) • DGN/DGNC/DGNM-C (481)

• DGN/DGNM-J/JS/JT (483) • DGR-P (488) • DGR-WP (488) • DGR-Z/ZS (486) • DGR/L-C DGRC/LC-C (482) • DGR/L-J/JS (484)

Spare Parts

Designation

DGTR/L 10B-1.4D20 SR M5X12 DIN912 HW 4.0
DGTR/L 12B-1.4D30 SR M5X12 DIN912 HW 4.0
HW 4.0
DGTR/L 16B-1.4D30 SR M5X12 DIN912 HW 4.0
DGTR/L 20B-1.4D30 SR M5X12 DIN912 HW 4.0
HW 4.0
DGTR/L 10B-2D30 SR M5X12 DIN912 HW 3.0
DGTR/L 12B-2D30 SR M5X12 DIN912 HW 3.0
HW 4.0
DGTR/L 16B-2D32 SR M4X14 DIN912 HW 3.0
DGTR/L 20B-2D35 SR M4X14 DIN912 HW 4.0
HW 4.0
DGTL 25B-2D35 SR M5X12 DIN912 HW 4.0
DGTR 25B-2D35 SR M4X14 DIN912 HW 4.0
HW 4.0
DGTR/L 12B-3D30 SR M5X12 DIN912 HW 4.0
DGTR/L 16B-3D35 SR M5X12 DIN912

DGTR/L 16BC-3D35 SR M5X12 DIN912 CGM 343* CF 343* SGCU 341* CGF 343*
DGTR/L 20B-3D40 SR M5X12 DIN912 CGM 343* CF 343* SGCU 341* CGF 343*

DGTR/L 20BC-3D40 SR M5X12 DIN912
DGTR/L 25B-3D40 SR M5X12 DIN912

* Optional, should be ordered separately

475