Page 24 - TURNING CATALOG p459-634

PARTING ±0.1 ±0.1

IC328DGR/L-C DGRC/LC-CREINSLRE
IC830Double-Sided Inserts forR PSIRR
IC1030Parting Bars, Hard MaterialsPSIRR
IC1028and Tough ApplicationsL CW
IC354CW
IC1010DGR/LC
IC808
IC908DimensionsTough 1 HardRecommended
IC20 Machining Data

Designation CW RE CDX(2) PSIRL PSIRR INSL f groove
- 20.80 • •••• • •
DGL 2202C-6D 2.20 0.20 18.00 6.0 6.0 20.80 • • • • • • • • • (mm/rev)
• 0.04-0.12
DGR 2202C-6D 2.20 0.20 18.00 - - 21.00 • • • • • 0.04-0.12
• 0.08-0.14
DGL 3102C-15D 3.10 0.20 18.00 15.0 - 21.00 • • • • • • • • • 0.08-0.18
0.08-0.18
DGL 3102C-6D 3.10 0.20 18.00 6.0 •• • 0.08-0.14
• 0.08-0.18
DGLC 3102C-6D (1) 3.10 0.20 18.00 6.0 - 21.00 • • • 0.05-0.15
15.0 20.90 • • • • • 0.08-0.18
DGR 3102C-15D 3.10 0.20 18.00 - 6.0 21.00 • • • • • • • • 0.08-0.20
0.08-0.20
DGR 3102C-6D 3.10 0.20 18.00 - 8.0 21.10 • • • • 0.08-0.20
0.08-0.20
DGR 3102C-8D 3.10 0.20 18.00 - •• 0.05-0.15
0.05-0.15
DGRC 3102C-6D (1) 3.10 0.20 18.00 - 6.0 20.90 •••• 0.10-0.25
- 18.90 • • 0.10-0.20
DGL 4003C-4D 4.00 0.30 - (3) 4.0 • 0.10-0.25
0.10-0.25
DGLC 4003C-4D (1) 4.00 0.30 - (3) 4.0 - 19.00 • 0.12-0.30
4.0 18.80 • • ••• 0.12-0.30
DGR 4003C-4D 4.00 0.30 - (3) - ••

DGRC 4003C-4D (1) 4.00 0.30 - (3) - 4.0 19.00
4.0 19.70 •
DGR 4800CS-4D 4.80 0.02 - (3) - 8.0 19.70 •

DGR 4800CS-8D 4.80 0.02 - (3) - 4.0 20.30 •

DGR 4803C-4D 4.80 0.30 - (3) - 8.0 20.30 •

DGR 4803C-8D 4.80 0.30 - (3) - - 19.10 • •

DGL 5003C-4D 5.00 0.30 - (3) 4.0 4.0 19.20 • •

DGR 5003C-4D 5.00 0.30 - (3) - - 19.10 • •

DGL 6303C-4D 6.35 0.35 - (3) 4.0 4.0 19.10 • •

DGR 6303C-4D 6.35 0.35 - (3) -

• Feed values for grade IC20 should be decreased by 50% • For cutting speed recommendations and user guide, see pages 538-547
(1) Inserts with coolant holes, recommended coolant pressure 10 bar minimum
(2) Cutting depth maximum
(3) No depth limit
For tools, see pages: C#-HELIR/L (265) • D/HGAD RE/LE-JHP (499) • DGAD-B-D (479) • DGAD/HGAD (479) • DGAQ (515) • DGAQ-JHP (515)
• DGFH (268) • DGFH-JHP (269) • DGFHL-26B-TR-D (470) • DGFHR/L (468) • DGFHR/L-B-D..(R/L) (470) • DGFHR/L-BC-JHP (469) • DGFS (469)
• DGPAD-JHP (480) • DGPAD-XL-JHP (480) • DGTR/L (476) • DGTR/L-B-D-JHP-SL (473) • DGTR/L-B-D-JHP-SL-MC (474) • DGTR/L-B-D-SH (471)
• DGTR/L-B/BC-D (475) • DGTR/L-BC-T (476) • HELIR/L (266) • NQCH-DGTR/L-D-SH-JHP (472)

DGN-W ±0.1
Double-Sided Inserts with RE INSL
Central Ridged Chipformer for CW
Parting and Grooving Hard
Materials and Interrupted Cuts Dimensions

Tough 1 Hard Recommended
Machining Data

Designation CW RE CWTOL(1) RETOL(2) INSL IC328 f groove
DGN 5003W IC1030 (mm/rev)
IC354 0.12-0.33

5.00 0.30 0.04 0.030 19.00 • • •

• No depth limit • For cutting speed recommendations and user guide, see pages 538-547

(1) Cutting width tolerance (+/-)

(2) Corner radius tolerance (+/-)

For tools, see pages: C#-HELIR/L (265) • C#-HFIR/L-MC (573) • CR HFIR-M (575) • DGAD/HGAD (479) • DGAQ (515) • DGAQ-JHP (515)

• DGFH (268) • DGFH-JHP (269) • DGTR/L (476) • HELIR/L (266) • HFAER/L-5T, 6T (566) • HFAIR/L-DG (573) • HFFR/L-T (564) • HFHR/L-5T (560)

• HFIR/L-MC (574) • HFPAD-5 (563) • HFPAD-JHP (562) • HGPAD (267) • HGPAD-JHP (267) • IM-HFIR-MC (574) • NQCH-DGTR/L-D-SH-JHP (472)

482 ISCAR