Page 10 - TURNING CATALOG p459-634
P. 10
PARTING DGFH-JHP CUTDIA CWN-CWX
Parting and Grooving Blades
with Channels for Low and Min. Max.
High-Pressure Coolant
Carrying DO-GRIP Inserts HF H
WB
Min. Max. WB_2
OAL
Bar Max
Designation CWN(2) CWX(3) WB WB_2 OAL H HF CUTDIA Insert
DGFH 32-2-JHP (1) 1.90 (4) 2.50 1.80 2.5 150.00 32.0 24.8 39.0 DG. 1.../DG. 2... SGC 340 EDG 33A-JHP*
DGFH 32-3-JHP 3.00 (4) 3.18 2.50 - 152.00 32.0 24.8 90.0 DG. 1.../DG. 3... SR M2.0X2.5DIN916 SGC 340 EDG 33A-JHP*
4.00 4.00 3.20 - 152.00 32.0 24.9 90.0 DG. 4.../GRIP 4... SR M2.0X2.5DIN916 SGC 340 EDG 33A-JHP*
DGFH 32-4-JHP 5.00 5.00 4.00 - 152.00 32.0 24.9 90.0 DG. 5.../GRIP 5... SR M2.0X2.5DIN916 SGC 340 EDG 33A-JHP*
6.00 6.35 5.20 - 160.00 32.0 24.9 90.0 DG. 6.../GRIP 6... SGC 340 EDG 33A-JHP*
DGFH 32-5-JHP
DGFH 32-6-JHP (1)
• For user guide and accessories, see pages 538-547
(1) Only an upper channel
(2) Minimum cutting width
(3) Maximum cutting width
(4) For DG. 1... insert, modify holder
* Optional, should be ordered separately
For inserts, see pages: DGN-LF/LFT (485) • DGN-MF (485) • DGN-P (487) • DGN-UT/UA (487) • DGN-W (482) • DGN-WP (488) • DGN-Z (486)
• DGN/DGNC/DGNM-C (481) • DGN/DGNM-J/JS/JT (483) • DGR-P (488) • DGR-WP (488) • DGR-Z/ZS (486) • DGR/L-C DGRC/LC-C (482)
• DGR/L-J/JS (484) • GRIP (269) • GRIP (full radius) (270)
For holders, see pages: TGTBU-JHP (497)
CUTDIA CWN-CWX
DGFHR-26...
DGFHR/L OAL HF H 15°
Parting and Grooving Reinforced
Blades Carrying DO-GRIP Inserts DGFHR-32... WB
OAL WB_2
CUTDIA
Designation H CWN(1) CWX(2) WB_2 WB OAL HF CUTDIA(3) Machines Insert
DGFHR 26T16-2 26.0 1.90 2.50 8.0 1.70 110.00 21.4 42.0 TNS-30 DG. 1.../DG. 2.. EDG 23A*
DGFHR/L 26T23-2 EDG 23A*
26.0 1.90 2.50 8.0 1.60 110.00 21.4 42.0 TNS-30/112 DG. 1.../DG. 2.. EDG 23A*
DGFHR/L 26T16-3 EDG 23A*
26.0 3.00 3.18 8.0 2.40 110.00 21.4 30.0 TNS-30 DG. 1.../DG. 3.. EDG 33A*
DGFHR/L 26T23-3 EDG 33A*
26.0 3.00 3.18 8.0 2.40 110.00 21.4 42.0 TNS-30/42 DG. 1.../DG. 3.. EDG 33A*
EDG 33A*
DGFHR/L 32T22-2 32.0 1.90 2.50 8.0 1.60 110.00 24.8 42.0 TNS-42 DG. 1.../DG. 2..
DGFHR/L 32T33-3 32.0 3.00 3.18 8.0 2.40 110.00 24.8
DGFHR/L 32T33-4 32.0 4.00 4.00 8.0 3.40 110.00 24.8 60.0 TNS-42/60/65 DG. 1.../DG. 3..
DGFHL 32T41-4 32.0 4.00 4.00 10.0 3.40 110.00 24.8
DGFHR 32T41-4 32.0 4.00 4.00 8.0 3.40 110.00 24.8 60.0 TNS-42/60/65 DG. 4.../GRIP 4..
80.0 TNS-65/80/480 DG. 4.../GRIP 4..
80.0 TNS-65/80/480 DG. 4.../GRIP 4..
• Insert limit is Tmax=18 mm. If deeper penetration is required, the insert should be modified into single-ended by the user.
• DG..1.0 insert can be mounted into pocket sizes 2 and 3. in which case the pocket width has to be modified - see page 479
• For user guide, see pages 538-547
(1) Minimum cutting width • For DG: 1.0 insert - modify holder
(2) Maximum cutting width
(3) The specified limit refers to the tool
* Optional, should be ordered separately
For inserts, see pages: DGN-LF/LFT (485) • DGN-P (487) • DGN-UT/UA (487) • DGN-WP (488) • DGN-Z (486) • DGN/DGNC/DGNM-C (481)
• DGN/DGNM-J/JS/JT (483) • DGR-P (488) • DGR-WP (488) • DGR-Z/ZS (486) • DGR/L-C DGRC/LC-C (482) • DGR/L-J/JS (484)
For holders, see pages: C#-TBK-R/L (623) • HSK A-WH-TBK-R/L (632) • SGTBF (618) • SGTBR/L (617) • SGTBU/SGTBN (616) • UBHCR/L (618)
468 ISCAR
